• All artwork must be ready to print before sending us your files.
• PNG file with a transparent background is required.
• 300 DPI resolution is suggested for best results. Anything less than this will start to lose quality when sizing and could cause your prints to not be clear or have jagged edges.
• Print Quality depends GREATLY on the quality of your artwork. If it looks blurry on your screen then it will look blurry when printed. We will not cancel an order due to image quality. It will be printed as is.
• Please ensure your images are cropped before you submit them. This is important to ensure that they print the correct size you requested. You can crop your images when you upload them to our website. It’s an amazing feature we have just for you.
• We do not make any changes to your artwork, we will ONLY print it.
• We will not replace low quality transfers for free that are a result of a low quality image. This is a non-recoverable cost for us and you will need to re-order them again at the regular price with a high quality image.
• We are not responsible for color, or quality issues resulting from bad quality/low-resolution files provided to us.

• No Screenshots, or downloads from social media/google as these only look good on your screen.
• Glowing / Hazy effects
• Transparency / Opacity Effects
• Super Thin / Small Fine Details

These items above will not print as intended or may not adhere properly to your garments as they cannot get the good white under base needed.

We will email you if your order is not a PNG file, not transparent, or if it is not cropped correctly. TAT will be extended due to these delays and your order will not ship in time. All orders that do not meet requirements will be cancelled and issued a store credit.

If you are unsure if your artwork is in the proper format, please send us an email, so we can help and alter if needed. ** Additional fees may apply. **

Actual colors may vary from your screen and the transfer. This is due to the fact that every computer monitor has a different capability to display colors and that everyone sees these colors differently. Please understand the actual color may vary slightly from your monitor. We cannot guarantee that the color you see accurately portrays the true color of the transfer.

A COMMERCIAL HEAT press is required for application. DTF transfers cannot be properly applied with a regular iron or Cricut easy press due to needing heavy even pressure and heat to adhere correctly.

We do not recommend the Cricut easy press, it does not produce enough pressure for transfers to adhere properly. You should always check the temperature of your press with an infrared thermometer before you begin pressing. It is common for heat presses to run hotter or colder than the digital temperature actually shows on your press. In this case, you may need to adjust your temperature to make the proper accommodations.

Please note: All heat presses vary in terms of temperature and pressure, below are general guidelines. If this is your first time ordering with us, we do recommend ordering a few extra designs for use in determining optimal temperature, time and pressure for your press.

Direct to film transfers:

1. Lint roll and preheat garment to remove excess moisture
2. Temp: 315°-325°
3. Pressure: Heavy pressure
4. Time: 12-15 seconds, cover with teflon sheet or parchment paper
5. Peel: COLD
6. Repress after peel: Lay teflon sheet or parchment paper over design and repress for an additional 3 seconds to cure into shirt

Washing Instructions:

• Turn Garment Inside Out
• Machine Wash, Cold
• Mild Detergent
• Do Not Use Fabric Softener or Bleach
• Tumble Dry Low (air dry for best results)
• Do Not Iron or Dry Clean
• Wait 24 hours before first wash

Instructions apply to the material only, please follow garment washing instructions as well.